Environmentally Friendly and Advanced Design of YM U-Type Vessels
Yang Ming always pays much attention to environmental protection. In addition to efficient use of natural resources, preventing pollution and protecting the ocean environment, we actively comply with international conventions and environmental laws/regulations. We make our best to contribute to the environmental protection following the most advanced standards.
In year 2004, Yang Ming was certificated with ISO 14001 proving our software/ hardware
facilities and procedures in the offices/terminals and on the ships conform with
international environmental standard.
In July 2006, Yang Ming joined Business Social Responsibility (BSR) and Clean Cargo
Working Group (CCWG) to promote business social responsibilities and minimize the
effect to the environment in the transportation process.
Our newly built, environmentally friendly 8,200TEU container vessels-U-Type could
clearly illustrate Yang Ming's care about environmental protection and new design
and its main particulars are as below:
Tin free paint or silicon based
paint on bottom shell
Under water outside shells (vertical & flat bottom areas) are applied with Tin
free instead of Tin-based self-polishing coating (SPC) to prevent from contaminating
aqua marine organisms.
The use of Tin free SPC is in response to growing international concern over the
harmful effects upon organism when Tin is used as anti-foulant on ship's hulls.
There are also applied with 5-year life time coating system that will extend the
dry-docking survey interval and re-application interval of coatings till every five
(5) years. This really eliminates the secondary pollution due to frequent sand ballasting
/ painting repair in dock. “Statement of Voluntary Compliance of Anti-Fouling System”
is issued by Class Society.
Box type Hatch Coaming
Most of ships are suffered from heavy corrosion when aged. The corrosion especially
happened at hatch coaming with open & complicated structures where are exposed
to weather deck. By using of box type, no more open or complicated structures appear
on the outside, and corrosion can be easily noticed that makes maintenance easier
Deck machines are driven by Electric
Motors instead of hydraulic oil system
It has nothing to do with the oil pollution in case of system is broken.
Air Dust Filter and Water Eliminator
for engine room air intakes
Being able to reduce the condensate water coming from M/E air cooler drainage and
further release the bilge separator workload.
Alternative Maritime Power (AMP)
Ship is fitted with AMP system through which the shore power can be supplied to
ship while the vessel berths at Port of Los Angeles (POLA). Air pollution caused
by running diesel generator engine can be entirely removed.
Specification: AMP to be installed at port side of deck house, including: 6600V,
350A x 2 cables, shore connection panel x 1, control panel x 1, cable reel x 1
Radar on the Fore Sprit
The vessel is equipped with the 3rd radar on the fore sprit so as to prevent obstructing
of crew's vision from containers. No dead vision exists.
Twin ballast water lines with dilution
function for ballast tanks
Two (2) ballast main lines with dilution are adopted and branched to ballast tanks
where the ballast water can be filled in and discharged out through the connections
diagonally placed at tanks simultaneously. By means of dilution method, it contributes
not only time saving of ballast water changing but also to keep same enough stability
of ship at open sea. In addition, the aqua marine organisms can be prohibited from
transplantation through ballast water exchange and the aboriginal marine life can
be protected from invasion of foreigners.Only U1 & U2 type vessels equip with this
One-Man Bridge Navigation System
The ship is designed in compliance with LR One-Man Bridge notation, NAV (ABS : NBL).
The wheel house arrangement and major nautical equipment are well arranged and integrated
on the bridge console where the invisibility is minimized. In addition, the bridge
navigation watch alarm system (BNWAS) is newly introduced for overseeing the on-duty
officer in order to keep whom in position. On the basis of One-Man, no. of watching
crew can be minimized and crews are able to navigate the vessel at their most convenient
to reduce risk of pollution caused by collision.
Vacuum Toilet system
Living quarter is fitted with modern Vacuum Toilet system to reduce the consumption
of fresh water as well as to reduce the sewage water.
Meanwhile, the sewage collection tank is enlarged to accommodate the black water
up to 12-day's consumption. Based on the combination effects of both above, the
berthing time at port or sailing time along the coast or in the restricted area
can be extended to fulfill the requirements and reduce the risks of pollution.
Low sulfur fuel oil storage, settling
& service tanks
Fitted with independent low sulfur fuel oil tanks, diesel engines have the alternatives
to burn the normal or low sulfur fuel oil to reduce SOx content in exhaust gas emission
so as to meet the MARPOL requirement in restricted area..
M/E Alpha Lubricator
M/E cylinder lubricating oil is pressure-injected by Alpha lubricator system which
is the brand new design to save the cylinder oil consumption. M/E Alpha lubricator
is a system composing of computer, oil pump, damper, pick-up sensor etc. which delivers
cylinder oil to liner wall exactly based on the piston ring's location inside liner.
So it can spread the cylinder lubricating oil evenly at right timing to cut down
cylinder oil consumption (reduce air emission) as well as extend cylinder liner
service life due to load-dependable injection.
High efficient Main & Generator engines
The ship is equipped with high efficient main engine & generator engine that
fuel oil can be well atomized and combusted to reduce the harmful NOx content in
exhaust gas emission in order to reduce Greenhouse Effect.
All components involved in combustion chambers comply with MARPOL 73/78 Annex VI
Regulation, and are verified by Class Society.
Adoption of refrigerant R-404A
for air condition, provision refrigerating plant and unit coolers. Plants spaces
are also equipped with refrigerant leakage detecting system
By using HFC free refrigerant, there is no direct harmful impact on the environment
to avoid depletion of ozone layer and reduce greenhouse effect. All the pants spaces
are equipped with refrigerant leakage detecting system in order to limit pollution
in the very first time.
Bilge Primary tank
The ship is fitted with a large bilge water Primary Tank to pre-separate oil from
oily bilge. It is able to reduce the workload of Oily Bilge Separator as well as
to promote the treatment efficiency of the separator and reduce the possibility
of sea water pollution.
Bilge primary tank capacity: 6.0 M
Clean bilge tank
Drain water contaminated by oily content normally from cooler maintenance and oil-contented
coamings of machines that is collected in Bilge Holding Tank and Oily Bilge Tank.
In addition to the above tanks, M/E Air Cooler Drain Tank is designed to collect
the cleaning bilge from M/E air cooler drain. Cleaning bilge in said tank is easily
separated by separator because of light oily contamination. This can reduce workload
of Oily bilge Separator as well as the possibility of seawater pollution.
Capacity of each bilge water tank:
Bilge Holding Tank – 132.85 M
M/E Air Cooler Drain Tank – 170.25 M
Oily Bilge Tank – 201.37 M
Stern tube air seal
Air guard stern tube seal instead of Simplex seal of propeller shaft uses the air
as a medium to keep the sea water from ingress into engine room along stern tube.
Air guard system is developed by several prestigious makers and introduced to very
large container vessels in the beginning. In case of the occurrence of any seal
ring breakage, only air blown into sea water or sea water ingress into engine room
so as to prevent from lube oil pollution. Possibility of pollution will be limited.